Skip to content

Live view

The Dashboard is Aperture’s live wall: every camera you may see, playing live, with an overview of the system beside it. This page explains how the wall is laid out, how to show only some cameras, what the marks on a tile mean, and how live video reaches your browser.

The Dashboard is the first item in the navigation rail. On a phone the same item is called Live and opens a different layout made for small screens; see On your phone.

The wall fills the space beside the overview column with one tile per camera, each in a 16:9 frame.

Aperture tries every possible column count and keeps the one that gives the largest tiles while the whole wall fits on screen without scrolling. Five cameras on a wide screen therefore become two rows of two and one of one, rather than three and two, because that layout gives bigger pictures. A short last row is centred.

Only when even the best fit would make tiles narrower than 260 pixels does the wall stop shrinking and scroll instead, with as many columns of at least 260 pixels as fit across. The layout is recalculated whenever the window, the overview column or the number of cameras changes.

Tiles always fill their 16:9 frame, so a camera with a different shape (a panorama, a portrait doorbell) is cropped on the wall. When you open the camera, it shows in its own shape.

A camera that is switched off is left out of the wall. If every camera is off, the Dashboard says All cameras are disabled and links to Devices, where you switch them back on. With no cameras at all, it offers Add camera.

Where What you see What it means
Whole tile A white outline round the picture The camera sees motion right now.
On the picture A white box with a small icon tag A recognised object (person, vehicle, animal, package). Point at the box to see its name and confidence. See Object boxes.
Top right A pulsing red dot The camera is recording.
Top right A red Not recording label Recording should be running for this camera and is not. See Troubleshooting.
Top right A blue P badge, with a number when there are several A vehicle is parked in view.
Bottom right Weather icon and temperature The current weather at your site, when a location is set (Site and weather). If the camera has a Home Assistant sensor pinned to it, its reading replaces the weather.
Centre Offline over a dark picture No video is arriving from the camera. Whatever is still visible is not live.
Centre No signal Your browser could not open the live connection.

When you hover over a tile, its name appears at the top left with three buttons: Playback (opens this camera’s recordings), Expand (opens the camera) and Snapshot (downloads a JPEG). On a touch screen the name is always shown.

Click anywhere on a tile to open that camera.

On a desktop screen a column of cards sits to the left of the wall. Hide it with the small button at its edge (Hide overview) to give the wall the full width; Show overview brings it back. Your browser remembers the choice.

Card Shows
Weather and clock The current condition, the temperature and the time. An administrator can replace the outdoor temperature with a Home Assistant sensor under Settings › General › Overview temperature.
System Footage stored against the space allocated to Aperture (click it to open the storage settings), Oldest recording, the Aperture version and whether it is running, how many cameras are online, and Uptime.
Camera Capacity How much of this machine the cameras use, as a bar and resolution counts. It needs a hardware profile; until one is set, an administrator sees Set up hardware. See Capacity.
Real-time Bitrate The rate at which footage has been written to storage, one point per minute over the last 30 minutes. Current Bitrate is the last complete minute.
Spotlights A placeholder card in this release; its button does not do anything yet. An administrator can hide it with Settings › General › Spotlights card.
Video Archiving Download opens the export dialog for the cameras on screen. See Export and share.
Recent Detections The six latest events from the last two days, with a thumbnail, camera and duration. Click one to play it; click the card’s title to open Alarms.

Installed extensions can add their own cards below these.

“Online” in the System card means video is arriving from the camera, not that the camera is configured. A camera counts as online only while the server sees its picture.

The wall shows one view at a time: all cameras, one camera group, or a custom selection.

The view bar floats at the bottom of the wall. It appears when the pointer comes within about 120 pixels of the bottom edge and stays hidden otherwise, so the pictures stay clear. On a touch screen it is always visible. It holds:

  • the current view’s name and how many cameras it shows; click it to open the view menu,
  • the object box switch (Show object boxes / Hide object boxes),
  • Fullscreen.

The view menu lists All Cameras, every camera group, your Custom view if you have one, and Choose cameras…. Each entry shows how many cameras it contains. Aperture remembers the view you picked in this browser.

A camera group is a named set of cameras, such as “Outside” or “Ground floor”. Administrators create them; everyone can use them.

  1. Open Settings › Camera Groups.
  2. Click New group.
  3. Enter a Group name and tick the cameras that belong to it.
  4. Click Create group. The group appears in the view menu on every device, and in the group selector on phones.

A person who may only see some cameras sees only those cameras in each group, and the counts reflect that. If the group you were viewing is deleted, the wall falls back to All Cameras. See Users for per-camera access.

A custom view is your own hand-picked set, kept in this browser only.

  1. Open the view menu and click Choose cameras….
  2. Tick cameras in the list. Search Camera Name filters it. The preview above the list shows the wall as it will look on this screen with your selection.
  3. Click Apply.

The cameras appear in the order you ticked them. Clear custom view in the same dialog removes the selection and returns to All Cameras.

Fullscreen in the view bar puts the wall on the whole screen with a black background and no gaps at the edges. The view bar sits at the bottom of the screen and works as before. Press Esc or the same button again to leave. A camera you open from a fullscreen wall opens inside it.

Clicking a tile opens the camera in a window over the wall. The window takes the camera’s own shape, so a panoramic camera opens wide without black bars; Aperture remembers each camera’s shape in this browser so the window has the right size from the start.

The bar under the picture shows:

  • LIVE, the camera name, and REC while it records,
  • Show object boxes / Hide object boxes, Snapshot and Fullscreen in the middle,
  • View recordings on the right, which opens Playback for this camera.

Close the window with the Close button, by clicking outside it, or with Esc. Extensions that add a camera panel, such as pan and tilt controls, show it below the picture.

Many cameras send two streams: a full-quality main stream and a smaller, lower-resolution sub stream. You give Aperture one or both when you add the camera. Which one you watch depends on where you are:

Where Stream
Desktop wall Main
Camera opened from the wall Main
Phone, List View Main
Phone, Grid View and Compact Grid Sub
Playback at the live edge Your choice: High (HD) and Auto use the main stream, Low (SD) the sub stream

A camera without a sub stream always plays its main stream. Every tile on the desktop wall decodes a main stream in your browser, so a wall of many high-resolution cameras asks a lot of the computer you watch on.

Which stream is recorded is a separate setting; see Recording.

When object recognition is set up, recognised objects get a white box with an icon tag on the live picture. Point at a box to expand its tag to the object’s name and confidence, for example “person 87%”. Boxes glide between positions and disappear about 1.5 seconds after the object was last seen. A vehicle that stands still is not boxed; it shows as the blue P badge instead.

The object box switch is shared by the Dashboard, the opened camera and Playback, and your browser remembers it. It hides boxes and the P badge. The white motion outline round a tile is not affected by it.

While anyone watches a camera live, on a tile, in an opened camera or in Playback, recognition keeps checking that camera’s picture even when nothing moves, so a person standing still in view keeps a box. Without object recognition there are no boxes, but the motion outline still works.

Live video on the Dashboard and in an opened camera is always muted. To listen, open the camera in Playback: at the live edge, Unmute in the control bar turns sound on. You hear audio only if the camera sends it.

Aperture has no built-in pan, tilt or zoom control. Two camera controls appear in Playback while you watch live:

  • Picture settings, for cameras with ONVIF picture settings switched on (brightness, contrast, day and night). See ONVIF and RTSP.
  • The spotlight button (Turn the spotlight on / Turn the spotlight off), for Reolink cameras that have a spotlight. If the camera refuses, its reason shows under the button.

Pan and tilt for some cameras come from extensions, which can add a panel under the opened camera and buttons in the Playback toolbar.

You do not need to configure anything for live view, but knowing what happens helps when a picture is slow or missing.

  • The camera is already connected. go2rtc, the video broker Aperture runs, holds one connection to each camera for recording and motion detection. Opening a live view joins that stream; it does not wait for the camera.
  • WebRTC first, MSE as a fallback. The browser first tries WebRTC, which has the lowest delay. If WebRTC has not connected after 5 seconds, it switches to MSE, which carries the video over the same web connection as the app. WebRTC needs a direct network path to the server (port 8555); from outside your network, through a reverse proxy, live view usually runs over MSE.
  • No black flash. Until the first live frame arrives, the tile shows the camera’s latest snapshot.
  • Reused connections. A camera you open from the wall borrows the tile’s existing connection, so it appears at once.
  • Self-healing. If the picture freezes for 6 seconds, the player reconnects on its own, waiting a little longer after each failed try (up to 15 seconds) and trying until the picture is back. When you come back to the tab, unlock your phone or your network returns, every player checks within a second whether its picture moves and reconnects if not.

All live video goes through Aperture, which checks that you may see the camera. Camera passwords never reach the browser. The technical details are in Live streaming.

Aperture records H.265 (HEVC) without trouble, but whether your browser can show it depends on the browser and the device. If a camera’s tile stays black or shows No signal while others play, and the camera sends H.265, switch the stream you watch to H.264 in the camera’s own settings if it offers that. On a desktop that is the main stream; in the phone grids it is the sub stream.

  • A tile says Offline. The server receives no video from the camera. Check the camera’s power and network, and its state under Devices. See Troubleshooting.
  • A tile says No signal, other tiles play. The browser could not open this camera’s stream. The most common cause is an H.265 stream the browser cannot decode; see above.
  • Every tile is slow to start from outside the house. WebRTC cannot reach the server, so each player waits 5 seconds before it falls back to MSE. See Reverse proxy.
  • No boxes appear. Check that the object box switch is on and that object recognition is set up for the camera.

Related: Playback, On your phone, Cameras, Live streaming.