Aperture vs UniFi Protect: what differs
UniFi Protect is Ubiquiti’s recorder: it runs on a UniFi console and works best with UniFi cameras. Aperture is software you install on your own Linux machine and point at any RTSP camera. This page lists the differences, says when Protect is the better choice, and shows that you can use both. Protect facts come from Ubiquiti’s website and help center, read in November 2026.
The short answer
Section titled “The short answer”Choose UniFi Protect if you want an appliance with cameras, recorder and apps from one vendor, face and license plate recognition on the camera, and Ubiquiti’s own apps and remote access.
Choose Aperture if you already have cameras from other makers, want the recorder to run on a machine you choose, and want no vendor cloud in the path of your footage.
Side by side
Section titled “Side by side”| Aperture | UniFi Protect | |
|---|---|---|
| Runs on | Your x86-64 Linux machine. | A UniFi console: a Cloud Gateway, a Network Video Recorder or a Cloud Key+. Ubiquiti does not offer Protect for self-hosting on other hardware. |
| Cost | Free for noncommercial use. You supply the machine and the disks. | No license or subscription fee. You buy the console, the storage and, usually, UniFi cameras. |
| Cameras | Any RTSP source, from any maker. | UniFi cameras. Third-party cameras work through ONVIF, with motion detection, PTZ control and audio, and without other advanced features. |
| Object detection | On your server, on the CPU or an NVIDIA GPU: people, vehicles, animals and parcels. | On UniFi’s cameras. Person and vehicle detection; face and license plate recognition on AI or G6 series cameras. |
| Phones | An iPhone app, and the web app on every phone. | The Protect mobile app for iOS and Android. |
| Remote access | Yours to set up: a VPN or an HTTPS reverse proxy. | UniFi Site Manager or the Protect app. An encrypted connection brokered through Ubiquiti’s cloud to the local console. Optional and free. |
| Home Assistant | MQTT discovery published by Aperture. | A built-in Home Assistant integration. It needs Protect 7.2.105 or later on a UniFi OS console. |
| Footage | Your disks, with retention per camera and optional SMB or SFTP destinations. | The console’s disks. Enhanced Retention lowers the quality of older footage to save space. Archiving to Google Drive, Dropbox, OneDrive or a NAS share is available. |
What UniFi Protect does better
Section titled “What UniFi Protect does better”- Detection on the camera. The AI runs inside UniFi’s cameras, so the console needs no accelerator. Face and license plate recognition are part of Ubiquiti’s feature list. Aperture does not document face or license plate recognition.
- One vendor. Cameras, console and apps come from Ubiquiti. Aperture is software you assemble: a machine, an operating system and cameras of your choice.
- Remote access without opening your network. Site Manager and the app reach the console through Ubiquiti’s cloud connection. With Aperture you set up a VPN or an HTTPS reverse proxy yourself.
- Apps for both platforms. Protect has iOS and Android apps. Aperture has an iPhone app only.
- Appliance features. Alarm Manager automations, Case Manager, video walls and Storage Manager are in Ubiquiti’s feature list.
- Two-way audio on supported UniFi cameras.
What Aperture does differently
Section titled “What Aperture does differently”- Any camera that serves RTSP. Aperture needs one thing from a camera: an RTSP stream. Its camera page lists the addresses for Reolink, Tapo, Hikvision, Dahua, Axis and other brands. Cloud-only cameras (Ring, Nest, Blink, most Arlo) have no local stream and do not work. Third-party cameras in Protect are limited to motion detection, PTZ and audio.
- Your hardware, your choice. A mini PC, an old laptop or a virtual machine. See Requirements and sizing.
- No vendor cloud for the web app. Aperture has no account and no telemetry. The one outside service is the push relay for the iPhone app, which passes notifications on in encrypted form. See What leaves your network.
- A cost that is mostly hardware you already own for personal use. The license is noncommercial.
Using both
Section titled “Using both”Aperture can show UniFi Protect cameras next to your other cameras. It takes the stream your console hands out and, by default, sets the camera up for live view only: Protect keeps recording and detecting motion. See UniFi Protect cameras.
Limits to know before choosing Aperture
Section titled “Limits to know before choosing Aperture”- It runs on x86-64 Linux only, and you install and update it yourself.
- Its recognition finds people, vehicles, animals and parcels. It does not document face or license plate recognition.
- No Android app. The license is noncommercial.
Related
Section titled “Related”Compare all NVRs · UniFi Protect cameras · Add cameras · HTTPS and remote access